Volkl Peregrine 72 Rmotion (24/25)
High-tech all-mountain racer with outstanding versatility
- More information? Contact us about this product
- Add to comparison list
You could say that the term “all-mountain” was coined just for the Peregrine. Long, medium or crisp, short turns, cruising or skiing at the limits of speed, churned up or groomed slopes – if you’re ambitious about carving, look no further. With a 72 mm waist, the Peregrine is great for anyone who likes to carve quickly through every radius and sometimes really let rip.
Fully overhauled and designed in bright colours for this winter, the Peregrine 72 is impossible to miss on the slopes. With different geometry, a widened shovel and shortened tip and tail rocker, this powerhouse masters every turn radius and can switch edges even faster thanks to a 72-millimetre waist. Long, medium or short turns – if you’re ambitious about performance, look no further. Its versatility is magnified by Tailored Carbon Tips. Carbon fibres applied using Völkl’s exclusive Tailored Fibre Placement (TFP) process allow our engineers to influence curve behaviour with great accuracy. The strength and alignment of the fibres define the force you need to apply and the energy that builds up where it’s needed. Agile shovel reaction is a feature of special note. This means that as soon as you initiate a turn, the ski begins to steer in a measured and controlled manner, depending on how the edges are employed. This construction also allows means less weight without any loss of stability. Last but not least, TFP allows our designers to tailor every length to the requirements of each target group.
The whole Peregrine range is made with 3D.Glass at the front and rear areas, while the ski is built around our renowned multilayer wood core featuring a mix of poplar and beech. Two full layers of Titanal give the ski its familiar vigour. The Peregrine 72’s ride is also boosted by the R-Motion 3 GW binding.
For younger and lighter riders, the Peregrine 72 is available in a length of below 160 cm – 158 cm to be precise.
| Length | Sidecut Tip - Waist - Tail (mm) | Radius R1-Tip, R2-Waist, R3-Tail (m) | Weight (incl. binding) |
| 158 cm | 125 mm - 72 mm - 103 mm | -12.7 m- | 3025 g |
| 163 cm | 125 mm - 72 mm - 103 mm | -13.5 m- | 3070 g |
| 168 cm | 125 mm - 72 mm - 103 mm | -14.5 m- | 3135 g |
| 173 cm | 125 mm - 72 mm - 103 mm | -15.4 m- | 3205 g |
| 178 cm | 125 mm - 72 mm - 103 mm | -16.4 m- | 3285 g |
Size
158 CM ,163 CM ,168 CM ,173 CM ,178 CM
Tip Width
125 mm
Tail Width
103 mm
Rocker
Tip & Tail Rocker
Base
P-Tex 4504
Core
Multilayer Woodcore
Binding Interface
R-Motion 3
Included Marker Binding
R-MOTION 3 12 GW
Included Binding DIN
4.0 - 12.0
Recommended Marker Binding
RMOTION3 12 GW BLACK, RMOTION3 12 GW BLACK RED
Tailored Carbon Tips:
In this innovative manufacturing process the new Tailored Carbon Tips are produced by embroidering the individual carbon fibers onto a carrier material. This allows them to be positioned exactly along the stress lines, opening up completely new possibilities, for performance at the front of the ski, which has a decisive influence on the handling of the ski. The stiffness, torsion and thus the skiing characteristics can be specifically adjusted via the fiber thickness and millimeter-precise alignment. In this way, the fibers guide the dynamics to the areas of the ski where they are needed. The visibly integrated Tailored Carbon Tips are light, allow an agile shovel reaction with less effort and quickly build up energy. The Tailored Carbon Tips thus reach a new level of precision, direct tip response and active skiing pleasure.
Full Titanal:
The titanium setup makes the ski agile and dynamic. Especially friends of a hard, fast and aggressive riding style benefit from the quick response of this construction.
Full Sidewall ABS:
3D.GLASS:
Compared to classic glass constructions the three-dimensional and multiple-folded glass layers in the tip and in the tail area result in an increased edge grip and a more vivid rebound behavior in turns. 1 3D.GLASS IS INTEGRATED IN THE TIP AND TAIL OF THE SKI // flat glass under the binding making the center softer // variable turning at any speed 2 GLASS ABOVE THE SIDEWALL //providing additional support for superior edge grip on icy slopes 3 VERTICAL GLASS IN TIP & TAIL AREA //more pop for faster edge to edge changes
Base P-Tex 4504:
A sintered, ultra-high molecular polyethylene base with an extremely high density. Besides a great wear resistance and perfect wax absorption the P-Tex 4504 is extremely fast and exclusively used on our top of the line and race models. The material has been upgraded with special additives to make it thermal and electro-conductive and proves its qualities with premium glide and maximum speed in races.
Tip & Tail Rocker:
Character: Bends up only in the shovel and tail zones, with a camber shape in the middle
Multilayer Woodcore 1:
The side wall is laminated to extremely stable layers of wood on the sides of the sandwich core. In combination with a more flexible, lighter wood built into the center of the sandwich core construction provides numerous advantages: The hardwood part immediately adjacent to the sidewall effects a higher power transmission, improves the edge grip and supports the edge against external forces. The low weight of the softwood part in the middle of the ski brings more agility and maneuverability and reduces overall ski weight. The combination of both wood types running through the entire ski length contributes to an optimal distribution of the ski stiffness increasing the steering precision. It is the first and only sidewall/core technology intended for aggressive on-piste and racing use and capable of delivering the victory and defeat, even if it is measured in hundredths of seconds.
| Brand | Volkl |
| Article code | 210000125903 |
| SKU | V2410025.000.163K |
| EAN | 821264781838 |
